🔱
[BOOT] one board, every radio OK
T-EMBED CC1101 PLUS · 5 RADIOS ONBOARD
06 // PORT STATUS

What runs today

The honest ledger. Green means proven on the board. Amber means written and compiling, but not yet signed off against real hardware. Nothing is claimed as done before it is.

● READY

Core, display and menus

Boots, animated splash, custom icon set, anti-aliased fonts, full menu tree, and every list screen sized to this panel rather than a smaller one.

● READY

Encoder navigation

Turn, press, double-press and hold drive the whole firmware, including text entry and every screen action list.

● READY

WiFi and BLE suites

Scan, clients, deauth, PMKID, portal, wardrive; BLE scan, spam, GATT, HID and tracker hunting, with vendor identification from a 1400-entry OUI table.

● READY

SD and the LED ring

Card mounts on the shared bus, recursive path creation for saves, and eight pixels of reactive feedback tied to what the radios are doing.

● READY

Automated radio self-test

A suite on the device checks every radio over USB serial and reports machine-readable results: CC1101 identity and live RSSI, nRF24 register round-trips, BLE scan, WiFi scan, plus a regression that walks BLE → WiFi → BLE in one boot. Ten checks, about four seconds, non-zero exit on failure. It found three real firmware bugs.

◐ BRING-UP

NFC and EMV

The PN532 driver, tag reader, Mifare dump and EMV card reader are written and compile, but have not yet been validated against a live tag or card.

◐ BRING-UP

Sub-GHz on air

The decoders, antenna band switching and .sub parsing were all repaired, but capture and replay still need confirming against a real remote.

This ledger moves as the board is exercised. A card turns green when it has run on hardware, not when it compiles.