[ready]
Use the official Espressif web flasher
espressif.github.io/esptool-js
(also Web Serial, already on esptool-js 0.6.x), or Python esptool. Files live under
bin/.
T-Embed CC1101 Plus (ESP32-S3) — single image at 0x0:
esptool --chip esp32s3 -p <PORT> --baud 115200 write_flash 0x0 bin/tembed/poseidon-tembed-factory.bin
Flash at 115200. Higher rates drop this board's USB link partway through the write. If that happens you get a half-written image and a device that looks dead — it is not bricked, the firmware simply has to hold a power-latch pin high, so with no valid app the board powers itself off. Re-flash at 115200 and it comes back.
Port looks like COM<n> (Windows) or /dev/ttyACM0 (Linux/macOS).