🔱
[BOOT] one board, every radio OK
T-EMBED CC1101 PLUS · 5 RADIOS ONBOARD
01 // THE T-EMBED EXCLUSIVE

It reads cards. The Cardputer cannot.

This is the feature the Cardputer can never have, because the hardware simply is not there. The T-Embed carries a PN532 on its own I2C bus, and POSEIDON drives it with a hand-written reader plus a full contactless EMV stack on top. Fair warning up front: this stack is written and flashed but has NOT yet been validated against a live tag or a real card.

[HW] chip=pn532 bus=i2c 0x24 band=13.56 MHz modes=tag / mifare / emv ▸
◐ WRITTEN TO SPEC · PENDING ON-CARD VALIDATION

What it reads, and what it honestly cannot

A contactless card hands over its number and expiry with no authentication at all. That is the finding worth demonstrating. Everything else is reported honestly rather than dressed up.

$ emv read · ppse → aid → gpo → read record
PAN (card number) ......... READS  unauthenticated, every card
Expiry .................... READS
Cardholder name ........... RARE   Visa/MC stripped it years ago
Transaction log ........... RARE   optional; most issuers disable it
CVV ....................... NEVER  not on the chip. cannot clone.

Three readers on one chip

Identify any 14443A tag

UID of any length, ATQA and SAK on screen, and the family resolved from SAK: NTAG or Ultralight, Mifare Classic 1K and 4K, Plus, DESFire, JCOP, or plain ISO14443-4.

READ

Dump Mifare Classic

One press walks every sector with the common default keys, re-selecting the tag after each failed auth, and saves what it recovered as a raw .mfd file.

DUMP

Read a bank card

Full ISO14443-4 APDU transport with a BER-TLV parser: PPSE, AID select, GPO, and an AFL record walk. Shows scheme, PAN and expiry, and says plainly when a field is simply not on the card.

EMV

The APDU layer is shared, so a passport reader is the same transport plus BAC key derivation from the MRZ. Read your own cards.